Reliable Engineers

TECHNICAL SPECIFICATIONS: -

Pump Type: - SS Hand Rotary Barrel Pump

Pump Make: -TOSS.

Pump Model: -HBP-25

No Of Stages: -Single Stage.

Suction and delivery sizes: 25X25 MM 

Require Discharge capacity:- 350 mL/PER ROTATION 

Shut Of Head: -20 FEET.

Type of Impeller: - SEMI OPEN

Sealing:-  TEFLON OIL SEAL 

Liquid detail given by customer: Not Given

Given Specific Gravity: - Not Given

MATERIAL OF CONSTRUCTION: -

 All liquid contact parts are of  SS316

SCOPE OF SUPPLY:-

Hand barrel pump along with suction and discharge pipes  

PRICE (Without GST): -

Total Price:-  Rs 8100 /-Each

HBP pumps are used for pumping out liquids from drums, barrels and totes, etc.These are widely used by different sectors such as:Chemical plants,Food processing plants,Packaging plants, Pla
ng ,Semiconductor,Waste water treatment ,
Pharmaceu
cal, Laboratories,Automo
ve industries ,Agriculture.
High quality componentsLight weight, portableEasy to install, user friendly operaonSafe chemical transfer, an alterna
ve to manual - minimizes danger of spills, vapors, burns,health,
environmental, liability concernsErgonomically designed handleTamper proof handle can be padlocked to protect against unauthorized useSupplied with bung adapter suitable for MS/Plasc drum
Few parts - maintenance friendly.

TECHNICAL SPECIFICATIONS:-

Pump Type: -Vertical Centrifugal Long Shaft Pump

Pump Make: -TOSS.

Pump Model: - SVSP- 50/260

No Of Stages: -Single Stage.

Suction and delivery sizes: -50 X 50 MM.

Require Discharge capacity: - 30 M3/HR

Discharge Head: 17 meter.

Shut Of Head: - 20 meter.

Type of Impeller:- Close Impeller.

Sealing:-Sealess

 

MATERIAL OF CONSTRUCTION: - CAST IRON

Body, Impeller ,Stuffing box and Bearing Housing are of

standard cast iron

Bush:-Cft bush

Sleeve:-SS 410,

Plate, Pipe are of Mild Steel

PUMP LENTH 1500 MM

 

MOTOR SPECIFICATIONS: -

“7.5 HP X 1400 RPM”, 415 Volt, 3 Phase, 50 Hz,

“CROMPTON” Make IE-2, IP-55 Protection, AC Supply,

Vertical Flange Mounted ,NON-Flame Proof Motor.

 

SCOPE OF SUPPLY: -

Vertical Centrifugal Type Bare Shaft Pump WITH BASE FRAME WITHOUT MOTOR

 

ONLT PUMP PRICE 66500/-

BASEW FRAME PRICE 3000/-

TECHNICAL SPECIFICATIONS: -

Pump Type: - External SS Gear Pump

Pump Make: -TOSS.

Pump Model: -REG-15

No Of Stages: -Single Stage.

Suction and delivery sizes: -15X15 MM.

Require Discharge capacity:-20 LPM

Shut Of Head: -50 meter.

Type of Impeller: - GEAR TYPE

Sealing:- TEFLON GLAND PACKING   

Liquid detail given by customer:

Given Specific Gravity: -

 

MATERIAL OF CONSTRUCTION: -

 Body Gear shaft and all contact Parts are of SS316, Bush Teflon.  

 

REQUIRED MOTOR SPECIFICATIONS: -

“0.5 HP X 1440 RPM”, 415 Volt, 3 Phase, 50 Hz, “CROMPTON” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY:

 Horizontal External Gear Type Bare Pump Only

PRICE (Without GST): -

Total Price:-  Rs /-Each.

Pump price:-7600/-

Motor price:-

Base frame price:-

TECHNICAL SPECIFICATIONS: -

Pump Type: - External CI Gear Pump

Pump Make: -TOSS.

Pump Model: -REG-40

No Of Stages: -Single Stage.

Suction and delivery sizes: -40X40 MM.

Require Discharge capacity:-110 LPM

Shut Of Head: -20 meter.

Type of Impeller: - GEAR TYPE

Sealing:- GLAND PACKING   

Liquid detail given by customer:

Given Specific Gravity: -

 

MATERIAL OF CONSTRUCTION: -

 Body, back cover are off Graded FG-200 Cast iron Shaft En-8 ,Gear En-8, Bush Sintered Bronze

 

MOTOR SPECIFICATIONS: -

“2 HP X 1440 RPM”, 415 Volt, 3 Phase, 50 Hz, “CROMPTON” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY:

 Horizontal External Gear Type Bare Pump Coupled with Above Mention Electric Motor Mounted on Common MS Fabricated Base Frame & Coupling

PRICE (Without GST): -

Total Price:-  Rs /-Each.

Pump price:-

Motor price:-

Base frame price:-

TECHNICAL SPECIFICATIONS: -

Pump Type: -VERTICAL SEWAGE SUBMERSIBLE PUMP  

Pump Make: -TOSS.

Pump Model: - RESP 2.0/2

No Of Stages: -Single Stage.

Delivery sizes: - 50 MM.

Require Discharge capacity: - 550 LPM

Discharge Head: 2 meter.

Shut Of Head: -18 meter.

Type of Impeller: -Semi-Open Impeller.

Sealing:- Tc- Tc  Mechanical Seal

Solid Handling Size:- 35 mm

MATERIAL OF CONSTRUCTION: -

Motor Body- CI ,Pump Casing- standard cast iron ,Impeller-Standard CI ,Shaft-SS 410 ,Strainer -CI

MOTOR SPECIFICATIONS: -

“ 2 HP X 2900 RPM”, 220 Volt, 1 Phase, 50 Hz, “TOSS” Make, AC Supply, vertical monoblock NON-Flame Proof Motor.

SCOPE OF SUPPLY: 

SEWAGE SUBMERSIBLE PUMP.

PRICE (Without GST): -

 

Total Price:- 20150 Rs /-Each.

Hydro Test Pump

TECHNICAL SPECIFICATIONS: -

Pump Type: -Manual Plunger Type Hydrotest Pump 
Pump Make: -TOSS.
Pump Model: -RHT-70
No Of Stages: -Single plunger
Suction and delivery sizes: -½”
Pump Tank Size: -22 Litre
Discharge Pressure:-70 kg/cm2(1000 P.S.I.)


MATERIAL OF CONSTRUCTION: -
Plunger :- SS304
Discharge Valve:- SS304

Stainless Steel 304 Glycerin Filled Pressure Gauge With 4" Inch Dial. (NABL 
Calibrated)

SCOPE OF SUPPLY: -
Plunger Pump,4" DIAL PRESSURE GAUGE 
1.5 - METER PRESSURE HOSE