Reliable Engineers

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries

Pumps are provided with Teflon gland or mechanical seal as per requirement

All wetted parts are made from high pressure molded polypropylene

Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic

Special Features of MHPP Series

Back pull out casing, very easy for maintain

Heavy duty caster bearing housing

MVGP Series

No seal, stuffing box & gland

Pump can run even in dry condition

Maintenance free

Vertical submerged pumps no priming is required as pumps portion remain in liquids

Pumps are specially design for highly corrosive liquids in priming is not possible

Shaft is covered with polypropylene sleeve for protection from corrosives liquids

Available in different length

Available in correspond models of MHPP and MVGP

Application:

Effluent treatment plants

Filter Press for Dyes & Intermediates

De-scaling

Scrubbing of corrosives gases

Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage

Pickling in steel Rolling mills

Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries

Pumps are provided with Teflon gland or mechanical seal as per requirement

All wetted parts are made from high pressure molded polypropylene

Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic

Special Features of MHPP Series

Back pull out casing, very easy for maintain

Heavy duty caster bearing housing

MVGP Series

No seal, stuffing box & gland

Pump can run even in dry condition

Maintenance free

Vertical submerged pumps no priming is required as pumps portion remain in liquids

Pumps are specially design for highly corrosive liquids in priming is not possible

Shaft is covered with polypropylene sleeve for protection from corrosives liquids

Available in different length

Available in correspond models of MHPP and MVGP

Application:

Effluent treatment plants

Filter Press for Dyes & Intermediates

De-scaling

Scrubbing of corrosives gases

Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage

Pickling in steel Rolling mills

Electro plating process

• Smooth finish
• Unique look
• Innovative design

Being a well established-organization, we are engaged in manufacturing, exporting & supplying a distinguished range of Vertical Sump Pumps. Our offered pumps are intricately designed under the vigilance of skilled professionals using quality tested raw material and sophisticated technology in line with the international quality standards. Clients can avail this range in various designs, shapes and sizes at market leading price within given period of time.

Reliable engineers are expertise in manufacturing of Vertical Sump Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Vertical Sump Pumps.

Submerged Vertical Centrifugal Pump:

• Reliable vertical pumps are centrifugal type of single stage with semi open impellers at bottom. Handling liquids, containing solids, have a tendency to polymerize or crystallize

Special Features: No mechanical seal stuffing box required
• All the wet parts are in P.P. & Teflon construction with stand corrosion & erosion.
• No foot valve required to lift from negative suction
• No. leakages problem just like gland or mechanical seal
• Normal maintenance
• Easy Alignment
• Heavy duty bearing bracket.
• Centrifugal, quiet, vibration free
• In M.S. or S.S. Pump shaft are En-8 or SS-316
• Impeller are semi-open type hydraulically balanced by back wanes or in the case of large impeller diameters by balancing holes and ware rings both sides
• In P.P. pump shaft are quoted with P.P. sleeve supported in upper part by heavy ball bearing and in the lower part by a bearing bush and according to the shaft length. They are provided with an intermediate bush
•

Specifications:

-----

Up to 40 MTRS

Material of Construction

Flow

Up to 50 M3 /HR

------

Motor HP

1HP to 20 HP

Poly Propylene, M.S., C.I., S.S.

Application:

•
• Chemical Industries
• Petrochemicals
• Refineries
• Fertilizers. Slurries or Clear Liquid
• Inflammable & Toxic Liquid
• Corrosive Liquids
• General Industries

•

Being a well established-organization, we are engaged in manufacturing, exporting & supplying a distinguished range of Vertical Sump Pumps. Our offered pumps are intricately designed under the vigilance of skilled professionals using quality tested raw material and sophisticated technology in line with the international quality standards. Clients can avail this range in various designs, shapes and sizes at market leading price within given period of time.

Reliable engineers are expertise in manufacturing of Vertical Sump Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Vertical Sump Pumps.

Submerged Vertical Centrifugal Pump:

• Reliable vertical pumps are centrifugal type of single stage with semi open impellers at bottom. Handling liquids, containing solids, have a tendency to polymerize or crystallize
  
  Special Features:
  • No mechanical seal stuffing box required
  • All the wet parts are in P.P. & Teflon construction with stand corrosion & erosion.
  • No foot valve required to lift from negative suction
  • No. leakages problem just like gland or mechanical seal
  • Normal maintenance
  • Easy Alignment
  • Heavy duty bearing bracket.
  • Centrifugal, quiet, vibration free
  • In M.S. or S.S. Pump shaft are En-8 or SS-316
  • Impeller are semi-open type hydraulically balanced by back wanes or in the case of large impeller diameters by balancing holes and ware rings both sides
  • In P.P. pump shaft are quoted with P.P. sleeve supported in upper part by heavy ball bearing and in the lower part by a bearing bush and according to the shaft length. They are provided with an intermediate bush

Specifications:

Application:

• • • Chemical Industries
    • Petrochemicals
    • Refineries
    • Fertilizers. Slurries or Clear Liquid
    • Inflammable & Toxic Liquid
    • Corrosive Liquids
    • General Industries

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

With the valuable assistance of our skilled team of professionals, we have been able to come up with a wide range of PP Magnetic Centrifugal Pumps. We make use of the optimum quality raw material with the latest technology to manufacture these pumps. Due to the remarkable quality of the offered range, we have successfully attained the position of the market leader in this domain.

Reliable engineers are expertise in manufacturing of Centrifugal Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Stainless Steel Centrifugal Pumps,

Special Features:

• Pumps are fabricated type from rolled sheet
• Horizontal Centrifugal pumps with Close / Semi- Open/ Open type Impeller Design
  Less maintenance due less rotating parts.
• Safe and quite operation levels.
• Suitable for standard motor or flange type or foot cam flange type motor

Also Available In Bare And Mono block Pump

Flame proof Mono block are also available According to requirement different connection are available like dairy connection, tri clover connection, flange end connection, nipple connection Economic, Efficient & Easy in Maintenance

MOC : SS-304/SS316/SS316L

Application:

• Ideal for handling of Water, DM/DI Water, Mineral Water, Hot Water, Pharmaceuticals Liquid Drugs & Syrups, Milk, Butter Milk, Soft Drink, Beverages, Solvents, Acids, Alkalis, Light Petroleum products etc.
• Acid and Light Chemicals,
• Color Dyes and Pigments
• Booster Application
• Water Treatment Plants, R O Plants Manufacturer & Exporters Centrifugal Bare Pumps

With the valuable assistance of our skilled team of professionals, we have been able to come up with a wide range of PP Centrifugal Pumps. We make use of the optimum quality raw material with the latest technology to manufacture these pumps. Due to the remarkable quality of the offered range, we have successfully attained the position of the market leader in this domain.

Reliable engineers are expertise in manufacturing of Centrifugal Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Stainless Steel Centrifugal Pumps,

Special Features:

• Pumps are fabricated type from rolled sheet
• Horizontal Centrifugal pumps with Close / Semi- Open/ Open type Impeller Design
  Less maintenance due less rotating parts.
• Safe and quite operation levels.
• Suitable for standard motor or flange type or foot cam flange type motor

Also Available In Bare And Mono block Pump

Flame proof Mono block are also available According to requirement different connection are available like dairy connection, tri clover connection, flange end connection, nipple connection Economic, Efficient & Easy in Maintenance

MOC : PP/PVDF

Application:

• Ideal for handling of Water, DM/DI Water, Mineral Water, Hot Water, Pharmaceuticals Liquid Drugs & Syrups, Milk, Butter Milk, Soft Drink, Beverages, Solvents, Acids, Alkalis, Light Petroleum products etc.
• Acid and Light Chemicals,
• Color Dyes and Pigments
• Booster Application
• Water Treatment Plants, R O Plants Manufacturer & Exporters Centrifugal Bare Pumps

1. _FEATURES

• 100% Leak Proof/seal less Pump
• Zero Leakage Corrosion Resistance.
• User Friendly & Energy Saving.
• Easy Maintenance & standard Spares.
• Simple Reliable and Sturdy Monoblock.
• No Shaft Seal To Wear Or Replace.
• Easy To Maintain Simple Centrifugal Open Impeller.
• Design Long Life, Reliable And Trouble Free operation      

• Chemical industries
• Pharmaceuticals Industries
• Textile Processing & Dying
• Electroplating Industries
• Agitation De scaling Of Refrigera
• Water Processors

• Capacity from 10 LPM upto 750 LPM
• Head upto 40 mtrs.
• Moc in PP, SS-316 & PVDF
• Special Pumps for high temp upto 1500 C

TECHNICAL SPECIFICATIONS: -

Pump Type: -Horizontal CI Self Priming Centrifugal Monoblock Pump  

Pump Make: -TOSS.

Pump Model: -NSP-0

No Of Stages: -Single Stage.

Suction and delivery sizes: -40X40 MM.

Require Discharge capacity:-4.8 LPS

Discharge Head: 6 meter.

Shut Of Head: -14 meter.

Type of Impeller: - Semi Open Impeller.

Sealing:- CARBON-SIC    

Liquid detail given by customer:Not Given

Given Specific Gravity: -Not Given

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  CI Construction with EN-8  Shaft, CI Impeller.

MOTOR SPECIFICATIONS: -

“1  HP X 2900 RPM”, 220 Volt, 1 Phase, 50 Hz, “TOSS” Make AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY: 

CI Horizontal Self Priming Centrifugal Mud Type Monoblock Pump

TECHNICAL SPECIFICATIONS: -

Pump Type: -Horizontal  PP Magnetic Monoblock Pump  

Pump Make: -TOSS.

Pump Model: -RMD-85

No Of Stages: -Single Stage.

Suction and delivery sizes: -26X26 MM.

Require Discharge capacity:-85 LPM

Shut Of Head: -9 meter.

Type of Impeller: - Semi Open Impeller.

Sealing:- SEALLES     

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  pp  

Construction with  Ceramic Sleeve ,  Casing, 

back cover pp ,  Impeller pp ,

Shaft and washer high alumina ceramic Bush 

carbon 

filled Teflon , Casing gasket Viton .

MOTOR SPECIFICATIONS: -

“0.5 HP X 2880 RPM”, 220 Volt, 1 Phase, 50 Hz, “TOSS” MakeIE-2, IP-55 

Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY: 

Horizontal Polypropylene Magnetic drive Monoblock Pump

Total Price:- Rs 8600/-Each.

GST EXTRA

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

APPLICATION
Water treatment Plant Effluent Treatment Filter Press for dyes and Chemicals Fertilizer Plants Thermal and atomic power plants
Drugs & Pharmaceutical Industries Descaling of Tubes Scrubbing of corrosive gases like Cl2, Br, I, So2, Nh3, F2 Etc. Excellent for Vacuum ejectors. Transfering of concentrated HCL from road tankers. Paper & Pulp Industries Picking in Steel rolling mills. Caustic soda Plants : Chlorinted Brine, Conc. HCL, Dilute H2SO4 etc. PHOSPHORIC Acid Plants : H3PO4, H2SO4, HF and their mixture with or without solid (gypsum) up to 40% conc. Gas Washing Plants : Scrubbed Liquids containing Cl2, Br2, F2, I2, So2, So3, Co2, Nh3, Gases tec. with solids replace Hast Alloy. Rayon Plants : Sspin bath solution (H2SO4, ZNSO4, NASO4 etc.) Electro Plating

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process

1. _{VERTICAL SUMP PUMP}

• Sump pumps are verticallysuspended single casing pumps with separated discharge semi open or enclosedimpeller designed forwet pit application They are designed to provide dependable economical drainage service on medium capacity installa commercial buildings and general industrial application . Closedtype and semi-open type impeller designs are offered to handle a variety of liquids.
• Impeller and casing are designed for maximum

1. hydraulic efficiency and minimum thrust on rotating assembly. Unique space-saving design due to vertical.Impeller and casing are totally submerged in liquid so no priming

• vertical pump take likle space in plan since the liquid is led away to the axis of shaft
• The impeller is submerged, so pump does not require to be primed and is always ready for use

1. Due to positive head at suction the pump gives its rated performance as well as high overall efficiency whereas in horizontal pumps due to losses in suction line, foot valve etc.the rated performance of the pumps is not achieved.            

• Delivery Casing : The delivery casing has an area sufficient enough to ensure easy passage of liquid 
• Impeller: Impellers are enclosed / semi-open / open with large passage ways and thickened vanes at the inlet All impellers are dynamically balanced 
• Pump Shaft : The pump shafts are of high tensile carbon steel and designed for high torque transmission. Stainless steel shafts can be provided against requirement. The bearing areas are protected by stainless steel sleeves.Intermediate, line and head sha��s are of ample strength and rigidity. Minimum bearing span.is adopted to keep deflec.Line Shaft / Intermediate Shaft : Line shafts / intermediate shaft of high tensile carbon steel designed for high 
• power transmission are connected by intermediate couplings and run in closely
• spaced bearings for vibration -free operation
• Stuffing Box : Fi��ed at support plate level comprising five packings and a lantern ring. Grease sealing by
• water / liquid 
• Motor Stool : The heavy duty cast iron / mild steel motor stool is capable of taking the motor and rotor assembly
• weights as well as the axial thrust. It also houses the thrust bearings.
• Delivery Pipe : Heavy duty delivery pipe upto the motor stool floor level with one bend is standard supply with all.
• The following accessories are recommended.
• Screens at inlet of the sump to prevent solids of sizes larger than that recommended from entering the pump.
• Liquid level controllers to guard against dry running of the pump.
• Some fluids, such as molten sulphur, need to maintain a certain temperature in the pump and this is possible
• with the help of a steam jacket. The steam flows through the whole pump hea
• Delivery pipes and bend upto the motor stool

TECHNICAL SPECIFICATIONS: 

Pump Type: -Horizontal  PP Centrifugal Bare Pump  

Pump Make: -TOSS.

Pump Model: -RE-120

No Of Stages: -Single Stage.

Suction and delivery sizes: -40X32MM.

Require Discharge capacity:-22 M3/HR

Discharge Head: 5 meter.

Shut Of Head: -17 meter.

Type of Impeller: - Semi Open Impeller.

Sealing:- TEFLON BELOW      

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  pp  Construction with  Ceramic Sleeve ,  Casing, back cover pp ,  Impeller pp ,

Shaft and washer high alumina ceramic Bush carbon 

filled Teflon , Casing gasket Viton .

MOTOR SPECIFICATIONS: -

“2  HP X 2900 RPM”, 415 Volt, 3 Phase, 50 Hz, “CROMPTON” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY: 

Horizontal Polypropylene Centrifugal  Type Bare Pump Coupled with Above Mention Electric Motor Mounted on Common MS Fabricated Base Frame & Coupling

Pump price:- 17000/-

With the valuable assistance of our skilled team of professionals, we have been able to come up with a wide range of SS Centrifugal Pumps. We make use of the optimum quality raw material with the latest technology to manufacture these pumps. Due to the remarkable quality of the offered range, we have successfully attained the position of the market leader in this domain.

Reliable engineers are expertise in manufacturing of Centrifugal Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Stainless Steel Centrifugal Pumps,

Special Features:

• Pumps are fabricated type from rolled sheet
• Horizontal Centrifugal pumps with Close / Semi- Open/ Open type Impeller Design
  Less maintenance due less rotating parts.
• Safe and quite operation levels.
• Suitable for standard motor or flange type or foot cam flange type motor

Also Available In Bare And Mono block Pump

Flame proof Mono block are also available According to requirement different connection are available like dairy connection, tri clover connection, flange end connection, nipple connection Economic, Efficient & Easy in Maintenance

MOC : SS-304/SS316/SS316L

Application:

• Ideal for handling of Water, DM/DI Water, Mineral Water, Hot Water, Pharmaceuticals Liquid Drugs & Syrups, Milk, Butter Milk, Soft Drink, Beverages, Solvents, Acids, Alkalis, Light Petroleum products etc.
• Acid and Light Chemicals,
• Color Dyes and Pigments
• Booster Application
• Water Treatment Plants, R O Plants Manufacturer & Exporters Centrifugal Bare Pumps

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP

• Effluent treatment plants
• Filter Press for Dyes & Intermediates
• De-scaling
• Scrubbing of corrosives gases
• Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
• Pickling in steel Rolling mills
• Electro plating process

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Polypropylene Centrifugal Process Pump. Owing to its remarkable quality, the offered product is widely demanded in the market. Extensively used in mechanical and engineering industries, these pumps are manufactured by our experienced professionals using premium quality raw material and progressive technology. Moreover, we check that entire range on various parameters to make a flawless dispatch from our end.

Reliable engineers are expertise in manufacturing of Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump.

Special Features:

• Pp centrifugal pumps are used for handling highly corrosive chemicals in process industries
• Pumps are provided with Teflon gland or mechanical seal as per requirement
• All wetted parts are made from high pressure molded polypropylene
• Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic
• Special Features of MHPP Series
• Back pull out casing, very easy for maintain
• Heavy duty caster bearing housing
• MVGP Series
• No seal, stuffing box & gland
• Pump can run even in dry condition
• Maintenance free
• Vertical submerged pumps no priming is required as pumps portion remain in liquids
• Pumps are specially design for highly corrosive liquids in priming is not possible
• Shaft is covered with polypropylene sleeve for protection from corrosives liquids
• Available in different length
• Available in correspond models of MHPP and MVGP
  
  Application:
  • Effluent treatment plants
  • Filter Press for Dyes & Intermediates
  • De-scaling
  • Scrubbing of corrosives gases
  • Petrochemicals, highly corrosive chemicals, pesticides, Sea and water sewage
  • Pickling in steel Rolling mills
  • Electro plating process