Reliable Engineers

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Reliable engineers (toss) organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

  Reliable engineers (toss)organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

TECHNICAL SPECIFICATIONS: -

Pump Type: -Horizontal SS Self Priming Monoblock Pump  

Pump Make: -TOSS.

Pump Model: -RSP-2

No OfStages: -Single Stage.

Suction and delivery sizes: -25X25 MM.

Require Discharge capacity: -31 LPM

Discharge Head: 5 meter.

Shut Of Head: -25 meter.

Type of Impeller: -Open Impeller.

Sealing:-Mechanical Seal

Liquid detail given by customer: WATER.

Given Specific Gravity: -1.

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  SS316 Construction with SS316 Shaft, SS316 Impeller.

MOTOR SPECIFICATIONS: -

“0.5  HP X 2900 RPM”, 415 Volt, 3 Phase, 50 Hz, “TOSS” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY:

SS316 Horizontal Self Priming Monoblock Pump

TECHNICAL SPECIFICATIONS: -

Pump Type: -Horizontal SS Self Priming Monoblock Pump

Pump Make: -TOSS.

Pump Model: -RSP-3

No OfStages: -Single Stage.

Suction and delivery sizes: -25X25 MM.

Require Discharge capacity:- 49 LPM

Discharge Head: 5 meter.

Shut Of Head: -40 meter.

Type of Impeller: -Open Impeller.

Sealing:-SIC-SIC

Liquid detail given by customer: WATER.

Given Specific Gravity: -1.

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  SS316 Construction with SS316 Shaft, SS316 Impeller.

MOTOR SPECIFICATIONS: -

“1 HP X 2900 RPM”, 415 Volt, 3 Phase, 50 Hz, “TOSS” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY:

SS316 Horizontal Self Priming Type Monoblock Pump

PRICE (Without GST): -

Total Price:- 14800 Rs /-Each.

With the valuable assistance of our skilled team of professionals, we have been able to come up with a wide range of SS Centrifugal Pumps. We make use of the optimum quality raw material with the latest technology to manufacture these pumps. Due to the remarkable quality of the offered range, we have successfully attained the position of the market leader in this domain.

Reliable engineers are expertise in manufacturing of Centrifugal Pumps, Design of pump is sturdy and parts are with long life, manufacturers & exporters Stainless Steel Centrifugal Pumps,

Special Features:

• Pumps are fabricated type from rolled sheet
• Horizontal Centrifugal pumps with Close / Semi- Open/ Open type Impeller Design
  Less maintenance due less rotating parts.
• Safe and quite operation levels.
• Suitable for standard motor or flange type or foot cam flange type motor

Also Available In Bare And Mono block Pump

Flame proof Mono block are also available According to requirement different connection are available like dairy connection, tri clover connection, flange end connection, nipple connection Economic, Efficient & Easy in Maintenance

MOC : SS-304/SS316/SS316L

Application:

• Ideal for handling of Water, DM/DI Water, Mineral Water, Hot Water, Pharmaceuticals Liquid Drugs & Syrups, Milk, Butter Milk, Soft Drink, Beverages, Solvents, Acids, Alkalis, Light Petroleum products etc.
• Acid and Light Chemicals,
• Color Dyes and Pigments
• Booster Application
• Water Treatment Plants, R O Plants Manufacturer & Exporters Centrifugal Bare Pumps

TECHNICAL SPECIFICATIONS: -

Pump Type: -Horizontal SS Self Priming Bare Pump  

Pump Make: -TOSS.

Pump Model: -RSP-0

No Of Stages: -Single Stage.

Suction and delivery sizes: -12X12 MM.

Require Discharge capacity: -15 LPM

Discharge Head: 5 meter.

Shut Of Head: -20 meter.

Type of Impeller: -Open Impeller.

Sealing:-Mechanical Seal

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  SS316 Construction with SS316 Shaft, SS316 Impeller.

MOTOR SPECIFICATIONS: -

“0.5  HP X 2900 RPM”, 415 Volt, 3 Phase, 50 Hz, “CROMPTON” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY:

SS316 Horizontal Self Priming Type Bare Shaft Pump Coupled with Above Mention Electric Motor Mounted on Common MS Fabricated Base Frame & Coupling

TECHNICAL SPECIFICATIONS: -

Pump Type: -Horizontal SS Self Priming Monoblock Pump  

Pump Make: -TOSS.

Pump Model: -RSP-1

No OfStages: -Single Stage.

Suction and delivery sizes: -25X25 MM.

Require Discharge capacity: -38 LPM

Discharge Head: 5 meter.

Shut Of Head: -25 meter.

Type of Impeller: -Open Impeller.

Sealing:-Mechanical Seal

Liquid detail given by customer: WATER.

Given Specific Gravity: -1.

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  SS316 Construction with SS316 Shaft, SS316 Impeller.

MOTOR SPECIFICATIONS: -

“0.5  HP X 2900 RPM”, 415 Volt, 3 Phase, 50 Hz, “TOSS” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY:

SS316 Horizontal Self Priming Monoblock Pump

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of SS Self Priming Pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality.

Special Features:

• All witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks
• Self priming pumps are with regenerative /centripetal type impeller for good suction capacity.
• Low NSPH is required
• Quick suction and no foot valves are required Suction capacity is 8 meters.

Also Available In Bare And Mono Block Pump:

• Flame proof mono block are also available
• Economic, Efficient & Easy in Maintenance

MOC: SS-304/SS316/SS316L

Seal :Different types of seal are available as per liquids ,normally pumps are fitted with silcon carbide/silicon carbide with Teflon parts.

Trolley Mouted is Available:

Able to handle temperature up to 80 C. Pump as customer requirement are also available.

Application:

• All liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc.
• Water treatment plants
• Washing equipments
• Boosting pressure system
• As barrel pump