Reliable Engineers

TECHNICAL SPECIFICATIONS: -

Pump Type: - SS Lobe Pump

Pump Make: -TOSS.

Pump Model: -LOBE-200

No Of Stages: -Single Stage.

Suction and delivery sizes: 50X50 MM TC CONNECTION

Require Discharge capacity:-280 LPM

Shut Of Head: -70 meter.

Type of Impeller: - LOBE TYPE

Sealing:- TC-TC

Liquid detail given by customer:

Given Specific Gravity: -

 

MATERIAL OF CONSTRUCTION: -

 All liquid contact parts are of  SS316 Including  with Body, lobe, shaft ,front cover, Bearing housing Cast iron

 

REQUIRED MOTOR SPECIFICATIONS: -

“5 HP X 750 RPM”, 415 Volt, 3 Phase, 50 Hz, “CROMPTON” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted,NON-Flame Proof Motor.

SCOPE OF SUPPLY:

 Horizontal SS316 Lobe type Bare Pump 

PRICE (Without GST): -

Total Price:-  Rs /-Each.

Pump price:-52650

Motor price:-

Base frame price:-

1. _APPLICATIONS

• _{Alkaline Solution /Alcoholic Drinks}
• ^{Acids, Fine Chemicals}
• ETP/STP Treatment Plants
• Colour dyes and Pigments / Plants
• Descaling Application/Paper & Cement Industries
• Water Treatment Plants
• Detergent , Soaps, Paste & Shampoo
• Natural Cellulose Fiber / Synthetic fiber system
• Hold & Cold Water Pumping

     2. FEATURES

• As all Pumps are made from I.C
• Mono block Pump are ideal for small chemical transfer application
• Pump can handle liquid having viscosity up to 1000 centipois
• Pumps are highly energy efficient and requires less NPSH to function without cavitation
• The Pumps can work under a vaccum of 720 mm of Hg, Suitable for vacuum evaporators.
• Pumps are Available with closed / semi open impellers.
• The best elastomers are used in the pumps
• Pumps are sturdy indesign as made from I.C casting

TECHNICAL SPECIFICATIONS: -

Pump Type: -Horizontal  PP Centrifugal Bare Pump  

Pump Make: -TOSS.

Pump Model: -RE-100

No Of Stages: -Single Stage.

Suction and delivery sizes: -25X25MM.

Require Discharge capacity:- 6 M3/HR

Discharge Head: 8 meter.

Shut Of Head: -11.5 meter.

Type of Impeller: - Semi Open Impeller.

Sealing:- TEFLON BELOW      

MATERIAL OF CONSTRUCTION: -

All liquid contact parts are of  pp  Construction with  Ceramic Sleeve ,  Casing, back cover pp ,  Impeller pp ,

Shaft and washer high alumina ceramic Bush carbon 

filled Teflon , Casing gasket Viton .

MOTOR SPECIFICATIONS: -

“1 HP X 2900 RPM”, 415 Volt, 3 Phase, 50 Hz, “CROMPTON” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted ,NON-Flame Proof Motor.

SCOPE OF SUPPLY: 

Horizontal Polypropylene Centrifugal  Type Bare Pump

GST EXTRA

Pump price:- 12000/-